LED Channel Letter Modules for a Landmark Sports Venue: IP67, 170° and 4–25 cm Letter Depth
How exterior channel letters at a sports venue in East Asia were lit with GMH LED modules: IP67, 170° beam, 12V/24V, for 4–25 cm letters, 3-year warranty.
A landmark sports venue in East Asia needed exterior channel letters that stayed legible in rain and at shallow viewing angles. GMH supplied LED modules rated IP65 with a 170° beam angle, available in 12V and 24V versions and sized for channel-letter side heights from 4 to 25 cm. The modules carry CE, FCC and RoHS conformity and a 3-year warranty; where the installation used GMH switching power supplies, the 36W–350W range applied, with a 3-year warranty on the IP67 -F series.
The starting condition
Exterior venue signage is a poor environment for narrow-beam lighting. A letter face lit by a tight beam shows bright spots at the centre and dark edges, which gets worse when the sign is viewed from an angle. Rain and cleaning expose the electronics to water, and a shallow letter leaves very little depth for the light source. The specification had to cover ingress protection, beam spread and letter depth at the same time.
Constraints
| Ingress protection | IP67 required for exposed exterior letters (IP65 also available) |
|---|---|
| Beam angle | 170° to keep wide, even illumination across the letter face |
| Letter side height | 4–25 cm, from shallow to deep channel letters |
| Supply voltage | 12V or 24V, matched to the installation driver |
| Conformity | CE, FCC and RoHS |
| Warranty | 3 years on LED modules |
Measured results
- Ingress protection
- Light distribution
- Letter depth covered
- Module warranty
What we changed, and why
- Match the module to the letter, not the other way round Channel-letter side heights of 4–25 cm are a real design range, not a single size. Selecting from one module platform across that range keeps the light source consistent when a venue has large letters, small wayfinding letters and light boxes in the same scheme.
- Use the 170° beam angle to remove hot spots A 170° emission spreads light across the face of the letter instead of concentrating it in the centre. That matters on shallow letters and on signs that spectators see from the side rather than head-on.
- Specify IP67 for exposed positions Exterior letters and low-level signage were specified at IP67; IP65 modules were used where the fitting is sheltered. Mixing the two ratings by position is more economical than over-specifying every element.
- Budget the power supply at the same time GMH switching power supplies are available in 36W to 350W versions, so the driver is selected from the same product family as the modules instead of being sourced separately.
“For this kind of installation the specification is the answer: IP67 where the letters are exposed, 170° so the faces read from an angle, and a module that fits a 4–25 cm letter. Everything else is installation detail.”
GMH application engineering, Signage lighting — A landmark sports venue
Where this approach stops working
These modules are designed and warranted for signage and channel-letter lighting, not for general area lighting, hazardous locations or submersible use. Rated inputs are 12V and 24V; the driver must be matched to the selected module. Project references are described by sector and region only — client names are not disclosed without authorisation.
Parts and process
Products used in this programme
LED Modules
LED modules are small, self-contained circuit boards or injection-moulded units that carry one or more LEDs and are mounted in rows inside channel letters and lightboxes to illuminate sign faces evenly. GMH makes the MH-series of 12V injection-moulded LED modules from 0.4W to 4W with 165°–175° beam angles, rated for 50,000 hours with lumen depreciation below 6%, from MOQ 200 pcs per model and a 5-day lead time on orders up to 1,000 sets..
View productLED Power Supplies
An LED switching power supply converts mains AC voltage into the low-voltage DC that LED signs and strips require, with 12V and 24V outputs common in signage. GMH builds two families: the MH-12Vxx-F waterproof series (36W–350W, IP67, −30°C to +45°C, 3-year warranty) and the MH-12Vxx-B ultra-slim series (45W–350W, 12 mm case, IP20, 0°C to +45°C, 2-year warranty).
View productLED Strip and Neon Flex for a Star-Rated Hotel Chain: 12V/24V, IP65, 2-Year Warranty
Read case studyLED Matrix Panels for a Large Shopping Mall: 16×96 to 32×320, 36W–350W Power
Read case studyTell us your sign project, get a product recommendation
Share your sign design — letter depth, face material, indoor or outdoor — and we will recommend the right LED modules, strip, power supply and protection rating, with a quotation. No obligation.