SMT Assembly for LED Strips, Modules and Control Boards

SMT assembly for LED strips, modules and controller boards: reflow soldering, LED binning and high-CRI options. ISO 9001, Jiangmen, since 2008.

SMT-assembled GMH LED strip and matrix panel circuit boards with surface-mount LEDs and control components
Surface-mount assembly for LED strips, modules and panels.
Short answer

SMT assembly places surface-mount LEDs and components onto circuit boards and solders them in a reflow oven, which is how LED strips, PCB modules, matrix panels and control boards are built at consistent quality. GMH runs SMT lines for 12V and 24V strip and module products, with LED binning, high-CRI options and placement under an ISO 9001 quality system.

When this process applies

This capability covers SMT placement and reflow soldering for our own LED strip, module, matrix panel and power-supply products. It is not a contract SMT service for customer-supplied designs.

Technical specifications

ProcessSMT placement and reflow soldering
Board typesFR-4 and flexible PCB
Voltages12V and 24V low-voltage products
LED optionsSingle colour, RGB, RGBW, high-CRI
Colour controlCCT and brightness binning
Quality systemISO 9001

Where it is the right choice

  • Flexible LED strips and silicone neon flex cores
  • PCB LED modules for signage
  • Flexible matrix panels in 16×96 to 32×320 formats
  • Controller boards for LED displays

Where it is the wrong choice

Stating this explicitly matters more than a capability list: if your part falls into one of these categories, another process will cost you less.

  • Through-hole assembly and hand-soldered one-off boards
  • Customer-owned designs supplied for contract manufacture
  • High-power boards needing active thermal management

Equipment

  • SMT pick-and-place lines
  • Reflow soldering ovens
  • Board handling and inspection stations
  • LED binning and colour-consistency checks
SMT Assembly

Process questions

What does LED binning do for a sign?

LEDs from the same nominal colour temperature vary slightly in practice. Binning groups LEDs with matching CCT and brightness so the whole sign face reads evenly instead of showing patches of different white.

Can you build high-CRI strips for retail?

Yes. High-CRI LEDs are selected for colour-critical retail and display work where brand colours must look accurate. Specify CRI at enquiry so the right LED bin is used.

Do you offer contract SMT for outside designs?

No. Our SMT capacity is dedicated to GMH LED products — strips, modules, matrix panels and control boards — rather than customer-supplied designs.

Tell us your sign project, get a product recommendation

Share your sign design — letter depth, face material, indoor or outdoor — and we will recommend the right LED modules, strip, power supply and protection rating, with a quotation. No obligation.