Injection Moulding and Waterproof Encapsulation for LED Modules
Epoxy and silicone injection moulding encapsulates LED modules for IP65 signage. Colour-stable, uniform light, made in Jiangmen since 2008.
Injection moulding and encapsulation seal LED circuits inside a solid epoxy or silicone body, giving the module mechanical strength and a waterproof barrier without a separate housing. GMH moulds LED modules for 4–25 cm channel letters in IP65 and IP67 versions, with 170° beam optics and LED binning for consistent colour across a sign face.
When this process applies
This capability covers moulded LED modules for illuminated signage: injection-moulded epoxy modules and silicone-sealed waterproof units. It does not cover general-purpose plastic moulding for third parties or tooling design for non-LED products.
Technical specifications
| Moulding material | Epoxy resin and silicone |
|---|---|
| Protection achieved | IP65 and IP67 |
| Modules for | Lightbox side heights 4–25 cm |
| Optics | Up to 170° beam angle |
| Colour control | LED binned by CCT and brightness |
| Quality system | ISO 9001 |
Where it is the right choice
- Outdoor channel letters needing waterproof modules
- Sign faces where uniform, dot-free light matters
- Modules exposed to rain, dust or wash-down
- Long runs where colour consistency between units is critical
Where it is the wrong choice
Stating this explicitly matters more than a capability list: if your part falls into one of these categories, another process will cost you less.
- Low-volume one-off prototypes, where mould tooling is not justified
- Products needing a transparent or lens-shaped optical housing
- High-power modules generating heat that a solid encapsulation cannot dissipate
Equipment
- Injection moulding presses for LED module encapsulation
- Mould tooling for channel letter module families
- Powered ageing racks for finished modules
- Water-resistance test setup for IP65/IP67 validation
Process questions
Why encapsulate LED modules instead of using a bare PCB?
Encapsulation gives a waterproof seal and physical strength in one step, so the module can sit inside a channel letter without a separate enclosure. For outdoor signs this is the practical route to an IP65 or IP67 rating.
Does moulding affect the colour of the light?
The encapsulant is chosen to keep colour stable, and LEDs are binned by colour temperature and brightness before assembly. Consistent binning is what stops a long sign face from showing banding between modules.
Can you mould a custom module shape?
Custom shapes require new tooling and are quoted case by case. For most channel letter applications a standard module from the 4–25 cm range is more economical and available sooner.
Related capabilities and products
SMT Assembly
SMT assembly places surface-mount LEDs and components onto circuit boards and solders them in a reflow oven, which is how LED strips, PCB modules, matrix panels and control boards are built at consistent quality. GMH runs SMT lines for 12V and 24V strip and module products, with LED binning, high-CRI options and placement under an ISO 9001 quality system..
View capabilityQuality Assurance
Quality assurance for LED signage combines incoming material checks, in-process control, powered ageing and waterproof verification so that products survive years of outdoor use rather than failing early. GMH runs an ISO 9001 quality system covering LED modules, strips, neon flex, power supplies and matrix panels, with CE, FCC and RoHS compliance on applicable series and warranties of 2–3 years by product line..
View capabilityKnowledge Base
Tolerance tables, cost mechanics and DFM rules written for buyers rather than engineers.
Read articlesTell us your sign project, get a product recommendation
Share your sign design — letter depth, face material, indoor or outdoor — and we will recommend the right LED modules, strip, power supply and protection rating, with a quotation. No obligation.