Silicone Extrusion for LED Neon Flex
Silicone extrusion turns LED strips into bendable, dot-free neon flex with IP65/IP67 protection. Cuttable, uniform light for signage outlines since 2008.
Silicone extrusion wraps a populated LED strip in a continuous diffuser tube, producing a flexible line of light with no visible LED dots and added resistance to water and impact. GMH extrudes neon flex for signage outlines and architectural accents, in IP65 and IP67 versions on 12V and 24V systems, with a 2-year warranty.
When this process applies
This capability covers silicone-extruded neon flex built from our own LED strips. It does not cover extruded profiles for non-LED products or custom tooling for third parties.
Technical specifications
| Diffuser | Extruded silicone, flexible and cuttable |
|---|---|
| Protection | IP65 and IP67 versions |
| Voltage | 12V and 24V |
| Light quality | Dot-free, continuous line |
| Colours | Single colour, RGB, RGBW |
| Warranty | 2 years |
Where it is the right choice
- Channel letter outlines and logo borders
- Building facades and architectural outlines
- Retail and hotel decorative lighting
- Outdoor signage exposed to rain
Where it is the wrong choice
Stating this explicitly matters more than a capability list: if your part falls into one of these categories, another process will cost you less.
- Applications needing a rigid, load-bearing profile
- Very tight bends below the product minimum radius
- Situations where the strip must be re-cut on site without re-sealing
Equipment
- Silicone extrusion lines
- Diffuser curing and cutting stations
- End-cap and connector sealing
- Ageing and waterproof checks
Process questions
Why does neon flex look smoother than a bare LED strip?
The silicone diffuser spreads each LED into a continuous line, hiding individual dots. A bare strip shows distinct points of light up close, which is why neon flex is preferred for visible sign outlines.
Can neon flex be cut to length?
Yes, at marked cutting intervals. On IP65/IP67 products the cut end must be re-sealed with an end cap or sealant to keep the waterproof rating — an unsealed cut is the most common cause of field failure.
What limits how tightly neon flex can bend?
Every profile has a minimum bend radius set by the internal PCB and LED layout. Bending tighter than that radius can crack the board and void the warranty. Tell us your tightest curve and we will recommend a profile.
Related capabilities and products
Injection Moulding & Encapsulation
Injection moulding and encapsulation seal LED circuits inside a solid epoxy or silicone body, giving the module mechanical strength and a waterproof barrier without a separate housing. GMH moulds LED modules for 4–25 cm channel letters in IP65 and IP67 versions, with 170° beam optics and LED binning for consistent colour across a sign face..
View capabilityQuality Assurance
Quality assurance for LED signage combines incoming material checks, in-process control, powered ageing and waterproof verification so that products survive years of outdoor use rather than failing early. GMH runs an ISO 9001 quality system covering LED modules, strips, neon flex, power supplies and matrix panels, with CE, FCC and RoHS compliance on applicable series and warranties of 2–3 years by product line..
View capabilityKnowledge Base
Tolerance tables, cost mechanics and DFM rules written for buyers rather than engineers.
Read articlesTell us your sign project, get a product recommendation
Share your sign design — letter depth, face material, indoor or outdoor — and we will recommend the right LED modules, strip, power supply and protection rating, with a quotation. No obligation.